Year-End Payroll Checklist for Tax Year 2026-27

Tax Year 2026-27 is the first full year under the Income-tax Act, 2025, so the year-end close looks a little different. Form 12BB is now Form 124, Form 24Q is Form 138 and Form 16 is Form 130. This checklist covers what HR and payroll teams should do from December to June, including TDS, PF, ESI and Labour Code checks. Definitions for these and other payroll terms are in the QkrHR HR glossary.

Why Year-End Payroll Needs Its Own Checklist
Most payroll errors that hurt at year end start months earlier: an investment proof that never arrived, a regime choice nobody recorded, or a PF wage that stopped matching the new ceiling. By March there are only three pay runs left to fix them.
This year has two extra reasons to plan early. First, Tax Year 2026-27 (1 April 2026 to 31 March 2027) is the first full year under the Income-tax Act, 2025. TDS on salary now falls under section 392, and the forms have new numbers. Second, the four Labour Codes took effect on 21 November 2025, and the EPF wage ceiling rose from ₹15,000 to ₹25,000 a month from 17 September 2026.
| Old name (1961 Act) | New name (2025 Act) | What it is |
| Section 192 | Section 392 | TDS on salary |
| Form 12BB | Form 124 | Employee's claims for deductions and HRA |
| Form 24Q | Form 138 | Quarterly TDS statement for salary |
| Form 16 | Form 130 | Annual TDS certificate for employees |
| FY / AY | Tax Year | The year income is earned and taxed |
Use the sections below as a working list for December to June, with the tasks and due dates for each stage of the close.
TDS On Salary: Proofs, Regime And Final Projection
TDS under section 392 is worked out on the employee's estimated income for the whole tax year. At year end, the job is to replace estimates with proof.
December to January
- Send the Form 124 request to all employees with a clear cut-off date, usually mid-January.
- Ask for proof of rent (HRA), life insurance, PPF, ELSS, home loan interest and principal, and any other claims.
- Confirm each employee's tax regime. The new regime is the default; employees who chose the old regime should have that on record.
- Collect previous-employer salary and TDS details for anyone who joined during the year.
February
- Verify proofs and drop claims that are not supported.
- Recalculate the full-year tax for every employee.
- Spread any shortfall over the February and March pay runs, not March alone, so take-home pay does not crash in one month.
Watch points
- Under the new regime, the standard deduction is ₹75,000 and the rebate covers taxable income up to ₹12 lakh.
- Employer NPS contributions remain deductible under the new regime within the allowed limit.
- Bonus, arrears and leave encashment paid in March change the final tax. Include them in the projection.
Payroll software that recalculates TDS each month after proofs are approved removes most of this manual work.
Worked Example: Final-Quarter TDS For One Employee
Take an employee with gross taxable salary of ₹18,00,000 for Tax Year 2026-27, in the new regime, with no other income.
| Step | Amount |
| Gross salary | ₹18,00,000 |
| Less standard deduction | ₹75,000 |
| Taxable income | ₹17,25,000 |
| Tax on ₹4–8 lakh at 5% | ₹20,000 |
| Tax on ₹8–12 lakh at 10% | ₹40,000 |
| Tax on ₹12–16 lakh at 15% | ₹60,000 |
| Tax on ₹16–17.25 lakh at 20% | ₹25,000 |
| Tax before cess | ₹1,45,000 |
| Health and education cess at 4% | ₹5,800 |
| Total tax for the year | ₹1,50,800 |
Suppose ₹12,000 a month was deducted from April to December, a total of ₹1,08,000. The balance is ₹1,50,800 − ₹1,08,000 = ₹42,800. Spread over January, February and March, that is about ₹14,267 a month.
Now suppose a ₹50,000 performance bonus is paid in March. Taxable income rises to ₹17,75,000. The extra ₹50,000 is taxed at 20% plus cess, adding ₹10,400 of tax, which must be deducted before 31 March. If the bonus is decided late, the March TDS jumps. That is why the bonus decision should reach payroll by February.
The slab rates above are the ones published for Tax Year 2026-27. Check them against your payroll system's tax master before the final run.
TDS Deposits, Form 138 Returns And Form 130
Deducting TDS is half the job. The other half is depositing it on time and reporting it correctly.
| Task | Due date |
| Deposit TDS for April to February | 7th of the next month |
| Deposit TDS deducted in March | 30 April 2027 |
| Form 138, Q3 (Oct–Dec 2026) | 31 January 2027 |
| Form 138, Q4 (Jan–Mar 2027) | 31 May 2027 |
| Issue Form 130 to employees | 15 June 2027 |
Checklist before filing Form 138 for Q4
- Match the TDS deducted in payroll with the challans deposited, month by month.
- Check every employee's PAN. A wrong PAN means the credit does not reach the employee.
- Include the salary details annexure, which goes with the Q4 statement.
- Record regime choice and deductions exactly as used in the TDS calculation.
Penalties to avoid
- A late Form 138 attracts a fee of ₹200 a day, capped at the TDS amount (section 427).
- Late deposit attracts interest for each month or part of a month.
- A late Form 130 can attract a penalty of ₹500 a day per certificate.
Corrections are possible. A corrected Form 138 can be filed later, but a clean first filing saves weeks of employee queries.
PF And ESI Year-End Checks
Statutory contributions need a separate year-end review, because errors here sit with the EPFO and ESIC, not just in your books.
PF
- The EPF wage ceiling rose from ₹15,000 to ₹25,000 a month from 17 September 2026. Check that wages from that date were calculated on the new ceiling, where your policy restricts contributions to the ceiling.
- Under the new ceiling, the EPS share is 8.33% of ₹25,000, about ₹2,083 a month, up from about ₹1,250.
- Match the ECR filed each month with the payroll register and the challan paid.
- Check that every new joiner has a UAN and every leaver has an exit date in the portal.
ESI
- ESI applies where gross wages are up to ₹21,000 a month. The employee pays 0.75% and the employer 3.25%.
- An employee who crosses ₹21,000 mid-way stays covered until the end of that contribution period. Check that coverage was not stopped too early.
Professional tax and LWF
- Many states collect professional tax in February or March, and Labour Welfare Fund is often due in December or January. Confirm the dates for each state you operate in.
Run all of this through one register. With payroll software, the ECR and ESI files come from the same data as the salary slips, so they match by design.
Labour Code Checks: Wages, Leave And Bonus
The Labour Codes have applied since 21 November 2025, so this is the first year-end close under them. Central rules were finalised in May 2026, but many states are still at the draft stage. Check the rules of the state where each employee works.
Wages
- Under the Code on Wages, if excluded allowances such as HRA and conveyance exceed 50% of total pay, the excess is added back to "wages".
- That higher wage base feeds PF, gratuity and leave encashment. Review salary structures before the new year's increments are loaded.
Leave
- Reconcile leave balances for every employee before 31 December or your leave year end.
- Apply your carry-forward limit and decide which balances are encashed and which lapse. The OSH Code allows carry-forward up to 30 days; confirm your state rules.
Bonus and gratuity
- Confirm which employees are eligible for statutory bonus and plan the payout date within the legal time limit.
- Fixed-term employees now qualify for gratuity after one year of service. Check year-end contract expiries.
Full and final settlement
- Wages for employees leaving at year end must be paid within two working days of the last working day.
Common Year-End Payroll Mistakes
These come up every year, and most are easy to prevent.
| Mistake | What it causes | How to prevent it |
| Collecting proofs in March | Large TDS jump in the last pay run | Cut-off in January, review in February |
| Using old form names | Confusion with employees and auditors | Update templates to Form 124, 138 and 130 |
| Missing previous-employer income | Short deduction, employee pays tax later | Collect details at joining |
| Late bonus decisions | March TDS spike | Freeze bonus figures by mid-February |
| PF still on ₹15,000 ceiling | Short contributions from 17 September 2026 | Recheck PF wage set-up |
| No leave reconciliation | Wrong encashment and disputes | Close leave balances before year end |
A simple year-end calendar
- December: Leave reconciliation; send Form 124 requests.
- January: Proof cut-off; Q3 Form 138 by 31 January.
- February: Verify proofs, final tax projection, freeze bonus.
- March: Final pay run with correct TDS; deposit by 7 March for February.
- April to June: March TDS deposit by 30 April, Q4 Form 138 by 31 May, Form 130 by 15 June.
How Payroll Software Makes Year-End Easier
Most year-end work is checking that numbers in different places agree: proofs against declarations, TDS against challans, payroll against ECR. That is exactly what software does well.
With QkrHR payroll software, teams can:
- Collect Form 124 declarations and proofs online, with approvals tracked per employee.
- Recalculate TDS every month for both tax regimes, so March has no surprises.
- Generate PF ECR and ESI files from the same payroll data.
- Keep leave balances, encashment and carry-forward in one place.
- Produce the data needed for Form 138 and Form 130 without re-keying.
What still needs people
- Deciding on doubtful proofs and exceptions.
- Approving bonus figures and final settlements.
- Tracking state-level Labour Code rules as they are notified.
Software will not replace judgement, but it gives your team the time to apply it where it counts. Start the year-end review in December, keep one source of payroll data, and the June deadlines become routine rather than a rush.